Shipping throughout Russia and to other countries

Sample Coolers E'KOTERMAL OP-1-76, OP-1-133, etc.

Sample coolers are devices designed to reduce the temperature of the working medium in order to safely analyze its chemical composition. As a rule, for boiler houses and heating points, periodic analysis of the working environment circulating in heating networks is necessary. This makes it possible to identify the composition of the impurities contained in it, as well as to avoid exceeding the level of normative indicators.

Sample coolers 1-76 are network water sample coolers, also called sampling coolers OP-1-76 are used at sample temperatures up to 225 °C and pressures up to 3.2 MPa. With these parameters, the estimated cooling rate of the sample will be 5.5 liters per hour. The sample temperature should not exceed 40 °C.

Models: OP-1-76 (23.1715.01), OP-1-76 (23.1715.01-1), OP-1-76 (23.1715.01-2), etc.

Sampling coolers OP-1-133 - these are sampling coolers for cooling mains water or steam with temperatures up to 250°C and pressures up to 4.0 MPa. The volume of chilled water per sample for one hour (when working with the specified parameters) will be at least 25 liters.

Models: OP-1-133 (23.1715.04), OP-1-133 (23.1725.04), OP-1-133nj (23.1725.04ng), etc.

Sampling coolers OP-2-133 - these are two-point sampling coolers for cooling water or steam with a temperature of up to 250 °C and an operating pressure of up to 4.0 MPa.

Models: OP-2-133.

ECOTHERMAL Price List

ECOTHERMAL questionnaire

All E'KOTERMAL products

The group "New Technologies" offers for review the products of the plant E'KOTERMAL: air and sludge separators, sample coolers, magnetic activators, air collectors, hydraulic drills, magnetic sludge traps, collectors, sumpers, heating registers, etc.
  • Separators of air and sludge SVSH E'KOTERMAL
    Separators of air and sludge SVSH
    SVSH-20, SVSH-25, etc.
  • SV air separators E'KOTERMAL
    SV air separators
    SV-20, SV-25, etc.
  • SS sludge Separators E'KOTERMAL
    SS sludge Separators
    SH-20, etc.
  • Sample Coolers E'KOTERMAL
    Sample Coolers
    OP-1-76, OP-1-133, etc.
  • Magnetic activators E'KOTERMAL
    Magnetic activators
    MAV-15, MAV-20, etc.
  • Air collectors E'KOTERMAL
    Air collectors
    A1 and 017.000, etc.
  • Hydrofoils E'KOTERMAL
    Hydrofoils
    GS-25r, GS-32r, etc.
  • Magnetic sludge traps of the ES series E'KOTERMAL
    Magnetic sludge traps of the ES series
    FSHM-40, FShM-50, etc.
  • Collectors E'KOTERMAL
    Collectors
    KR-40/25x3, etc.
  • Mud trucks E'KOTERMAL
    Mud trucks
    TS-569.00.000, etc.
  • Heating registers E'KOTERMAL
    Heating registers
    sectional , etc .

About E'KOTERMAL

ECOTHERMAL company (St. Petersburg) has been operating since 2003. The main directions are the production of tank, water treatment and heat exchange equipment.

  • assortment

    The list of equipment produced by the company is very wide: separators, air collectors, hydraulic drills, collectors, sample coolers, sludge drains, sumpers and much more.

  • production

    The production uses modern technologies, such as laser and waterjet cutting of metal and pipes. The use of these technologies increases the accuracy of manufacturing parts and components.

  • quality

    The company focuses on the quality of products, it has a longer service life. This is facilitated by the use of high-quality materials and the correct organization of all stages of the production cycle.

Information Board E'KOTERMAL

Learn more about our products E'KOTERMAL.
  • ECOTHERMAL Price List from directory Ekotermal
    ECOTHERMAL Price List
  • ECOTHERMAL questionnaire in the store Ekotermal
    ECOTHERMAL questionnaire

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: